Separate three types of questions
Distinguish the filled formula–pack interaction, assembly and dispensing function, and the distribution performance of the packaged product. These activities can share a sample record but answer different questions. Passing an empty-bottle inspection does not establish all three.
| Question | Sample | Record |
|---|---|---|
| Formula contact | Actual filled assembly | Conditions and changes |
| Function | Intended parts | Assembly and handling |
| Distribution | Shipping configuration | Route, method and findings |
Build an evaluation matrix
For each check, name the objective, sample revision, owner, conditions and acceptance method. Select conditions around the formula and distribution environment. Where a standard is used, identify its version and suitability rather than treating an unspecified test badge as evidence.
Turn findings into decisions
When leakage, distortion or dispensing changes appear, record where and under which conditions they occurred. Review the relevant parts and assembly before deciding on a correction. Keep the approval record and assess the effect of later formula, construction or distribution changes.
Your Project Checklist
- Define each evaluation objective
- Record sample revision and owner
- Keep results and resulting decisions
Frequently Asked Question
Does a transport test establish formula stability?
They address different questions and should be planned separately.
References and Editorial Note
The resources below provide technical background. The purchasing questions and checklists are compiled by 樽宇包装. Confirm project-specific decisions through drawings, technical evaluation and approved samples.
Sources checked: 19 October 2026